Liquid plug: features and scope of the material

 Liquid plug: features and scope of the material

Under the original name "liquid cork" hides a multifunctional material based on natural cork and polymers. We are used to the fact that sealants are designed to fill seams and dock surfaces, but the possibilities of this compound are much more impressive.

Special features

Liquid cork is a kind of sealant, the base of which is a tiny fraction of cork tree. This ensures the environmental friendliness of the material, its high thermal insulation qualities, as well as the absence of shrinkage. The elasticity as well as the protection of the crushed bark of the cork oak is provided by the polymers that are part of it.

Sealant is designed to fill the docking and insulating gaps. At the same time homeowners were able to abandon the environmentally unsafe analogues of chemical origin.It is also interesting that, having a natural origin, the liquid cork does not attract birds and rodents.

As already mentioned, natural cork tree provides high heat insulating, as well as sound insulation properties.

It can be used to fill the joints between different in composition materials, due to the good adhesion of the sealant.

It does not shrink and is elastic, which allows it to be applied to the most common materials in construction without the risk of damage.

After solidification, a strong seam is formed that is resistant to mechanical damage and abrasion. In this regard, when the product gets on other surfaces, it should be immediately removed before freezing.

Among the advantages are moisture resistance, the sealant is even suitable for operation in conditions of high humidity, and resistance to temperature changes (this allows the sealant to be used not only inside but also outside the room).

Scope of application

The demand for the material is also due to its wide scope.

It is suitable for the following tasks:

  • improving the heat efficiency of the premises - with internal insulationfilled into the space between the flooring and the walls (especially if they are made of incompatible materials), filling the installation seams when installing door and window frames (after such processing drafts are completely eliminated);
  • external heat insulation - filling the joints between elements of reinforced concrete structures;
  • increase of the sound insulation coefficient in the conditions of multi-unit objects (noise reduction occurs on average by 27 dB);
  • use as an anti-vibration pads of the floor of the car, as well as systems of mechanisms and structures;
  • thermal insulation of the internal partitions of the object;
  • filling the grooves from the inside during the construction of wooden structures.

When using a liquid cork inside the room, it is possible to choose it in the right shade, which makes it possible to refuse additional decoration of the created layer.

    If the color is unimportant, or you want to preserve the hue of the cork itself, you should choose a composition on a transparent basis. In some ways, it will resemble PVC with the addition of crushed tree bark.

    If necessary, the sealant becomes, if necessary, join or fill the space between the dissimilar material. For example, the transition between wood and tile flooring, between tile and plastic panels, "strips" of the laminate. Liquid plug is also suitable for filling joints between concrete and wooden surfaces, providing additional strength and increasing the service life of coatings. As is known, in this situation, the sealing compound should be harmoniously combined with at least one of the adjacent materials.

    You can also use cork to fill the space between the walls and the floor, walls and ceiling, eliminating the emergence of "cold bridges" in these places and allowing you to refuse internal wall insulation.

    The material is not afraid of exposure to moisture and high temperatures, moreover, it has vapor barrier properties. This allows you to use it in the bathroom, in the kitchen. If cracks and defects appear on the outer surface of the walls of the building, a sealant with a suitable color can be applied in these places. They will be instantly eliminated, and the facade will be protected from the negative influence of the environment.

    The universality of the composition allows to use it as a facade finishing material. Thus, it is possible not only to improve the appearance of the building, but also to increase its thermal insulation and ensure moisture resistance, as well as significantly reduce the level of penetrating noise. Again, thanks to the vapor permeability and environmental friendliness of the material, the excess moisture from the house will be provided, which has a beneficial effect on the condition of the walls and the indoor microclimate of the room.

    It should be noted that there is both a universal liquid plug and modified versions of the product, in which one of the signs is more pronounced.

    Despite the fact that the liquid tube is suitable for filling the inter-seamless space of buildings from different materials, sometimes not even combining with each other, it cannot be used to fill the joints of a wooden wall. This is due to the tendency of wood to temperature expansion and drying out. When the density of the tree changes and its linear dimensions increase, a seam is depressurized.

    Another unsuitable surface for working with a sealant is carpet, as well as similar materials.

    Manufacturers

    Currently, the liquid tube is only gaining popularity in the domestic market.One of the reasons why Russian buyers refuse to purchase a product is its rather high price.

    In any case, purchase a liquid tube should be from well-known manufacturers who have won the trust of customers. One of the leading manufacturers of sealants is the Isocork brand. The purpose of the material - exterior finish. The use of this composition eliminates the use of facade materials for finishing, roofing sealants, insulation and foam for window openings.

    A similar effect has a cork coating under the trademark NanoCORK. Both formulations are available in different shades, but the second is characterized by greater affordability.

    Universal liquid tube represented by Suber Plast. It meets all the requirements for these products, has a diverse color palette.

    Versatility of application is different Bostik 3070 sealant - under this name several types of products are produced, the differentiation of which can be carried out by looking at the numerical value of the sealant.

    Bostik has a sealant with improved sound insulation properties - Bostik 2720. If the universal composition reduces the sound level by 27 dB, then this sealant - by 30 dB.

    The combination of affordability and acceptable quality is demonstrated by TN Sealant. It can be found in most specialty stores in large cities. Differs in universality, the characteristics corresponding to a product. The disadvantage is the lack of choice of color composition. It is available exclusively in dark brown version.

    There are negative reviews on this product on the Internet, related to the duration of the hardening of the sealant and the appearance of a peel on the surface of the seam.

    Comments of experts allow to conclude that, most likely, there is a fake, or the rules for applying the composition have been violated.

    Tips

    For high-quality sealing and reliable adhesion of the cork should follow the principles of application of the composition.

    • Working surfaces should be cleaned, degreased, dried, and then treated with a primer in 1-2 layers. A suitable composition is usually recommended by the sealant manufacturer, relevant information can be found in the instructions for use.

    If we neglect this stage, or it is irresponsible to approach its implementation, a significant decrease in the adhesion of the liquid plug can occur.

    • Prepare the mounting gun, check the condition of the pipe.
    • Fill the prepared space with sealant, evenly distributing it in the gap. If the adjacent surfaces have different heights, then when laying the sealant should be guided to a higher one.
    • Sprayed cork should not fall on adjacent surfaces, if this happened, you should immediately remove the stains with a cloth. If they freeze, it will not be easy to do.
    • After applying the composition should be leveled with a wet spatula, and if the gap is small - with wet hands.
    • After the partial curing of the cork, its surplus, which has protruded on the surface, is removed with a clerical knife.
    • For additional strengthening of the stiffened seam it is possible to use special elastic structure.
    • After complete sealing, you can polish the treated area.
    • To achieve the maximum attractiveness of the treated surface can be, choosing a sealant to the shade of the working bases. If this is not possible, it is better to use the classic shade of wood (brown gamma), gray or beige formulations. These colors are perfectly combined with most shades, universal.

    Review the ISOCORK liquid plug in the next video.

    Comments
     Comment author

    Kitchen

    Wardrobe

    Living room