Stretch ceiling in the attic: design features and design examples

Stretch ceiling in the attic - an unusual solution that requires consideration of many factors. Such a design of the ceiling space today is in demand, but it cannot be done without knowing the subtleties of the roofing structure, complicated in most cases by the presence of beams, the angles of the slopes, their different number and shape.

The attic is a heated dwelling under the roof. It can occupy a small part or make up the whole floor, performing the functions of a full-fledged home. A special feature is the shape of the ceiling, which is nothing but the roof of a house.This ceiling is completely different from its counterpart floor below.

It is distinguished by:

• geometric configuration, which is more complicated than the usual flat;
• the presence of output communications;
• design system with the refraction of the form, transitions and bends of levels;
• arrangement of windows, which is not the case with conventional ceilings.

Such design features, on the one hand, make it difficult to design the ceiling with a stretch canvas, on the other hand, they provide plenty of opportunities for creating an unusual design.

It is necessary to take into account the features of the roof:

• The design must be selected with carriers that do not collapse from the negative effects of humidity and weather factors, they should not be rusty.
• Elements of the frame should be different light weight, so as not to create an additional load on the rafters of the roof. You must choose a lightweight type of design.
• The tensioning system allows the use of the material at an angle with a rigid fixation, with the possible composition of several levels, which is caused by the design features of the ceiling.

The price of such a ceiling may immediately seem prohibitive, but the costs are paid off by a long service life.With the purchase of high-quality material and compliance with the installation technology, the stretch ceiling can decorate the roof of the attic for 30 years.

The disadvantage may be the inexperience of the master, because the installation of such a structure will be more difficult than usual.

The choice of materials for the tension mansard construction depends on the conditions of operation of the room and the nuances of fastening the carrier profiles.

As the canvas for the attic stretch ceilings are used mainly PVC film. It has high performance and a small width (about 3.5 m), but even this is enough for the use of seamless technology. Such a coating can have a glossy and matte texture.

Gloss allows you to visually increase the volume of the room, so it is in demand from a modern buyer. but mirror effect requires a minimum of furnishings, since everything that is located in the room is reflected on the surface of the coating.

If the budget allows, to finish the attic ceiling buy textiles. It is resistant to large sub-zero temperatures (up to -40 degrees), has a breathable texture, looks expensive, does not fade. The film, by contrast, is easier to clean.

For such structures, the choice of profile is of particular importance.

Consider the main nuances:

• wood systems are not suitable - they create an extra burden on the roof;
• aluminum frame elements are lightweight, easy to install, hide less space under the frame;
• plastic varieties are versatile, they can be bent, giving the desired shape.

These components of stretch ceilings are also important:

• Polyvinyl chloride products are easy to use, allow any bending, suitable for harpoon installation method.
• Dividing applicable for structures of several levels. They do an excellent job with the fixing function for backlighting.
• Gapless systems are used in cases where a gap between different levels is not needed.

• Curvilinear and flexible are needed when you need to bend the slats, giving them the desired shape.
• Angular varieties are used in cases where an inclined surface is needed.

Let us note briefly the varieties of the attic stretch ceiling, which today can be made for the arrangement of this attic room:

• sibling constructions are needed to mask problem areas, sometimes used in conjunction with drywall;
• two-tier the species are able to visually divide the space into separate functional areas, suitable for spaces with windows;
• multilevel structures of a complex type are intended for mansards with a roof located parallel to the floor and at an angle;

• arched - complex systems, the purpose of which is the partial allocation of certain nuances of the roof structure and masking the unsightly elements of the roof;
• dome - rare designs for roof finishing of the attic, made of matte and glossy film.

The advantages of this design include several factors:

• wide opportunities for design design taking into account different stylistics of the interior;
• masking the disadvantages of the base, no need for a leveling layer for the structure;
• the possibility of embedding of spot and ribbon-type luminaires, as well as fiber optic filaments;
• combination of stretch fabric with drywall constructions;
• the canvas is moisture resistant, does not respond to temperature changes, does not stretch during operation, does not tear, does not crack and does not change the texture;
• the film material of the tension fabric is resistant to sunlight - all the time of operation, its shade will be the same as at the time of purchase;
• the composition of the film is environmentally friendly: during the entire period of service it will not release toxins into the air, therefore the attic can be taken under the children's room;
• finishing is carried out after works on warming, it does not need to be thought out at the design stage;
• The material can be decorated with any pattern at the request of the customer, such a canvas does not need additional decoration.

Note the disadvantages of this design:

• due to the need for a frame, the area of ​​the room is reduced;
• installation requires maximum accuracy in the calculations in order to avoid damage to the ceiling material (film);
• when performing installation by a specialist, installation will cost much more than flat-type structures;
• This material is acceptable in the design of the attic only if it is made in light shades of color palette;
• For finishing it is impossible to use cheap material: the structure of fakes includes harmful components.

For the design of the attic structures of the tension type use mainly light colors. White is a favorite. This is due to the lack of light in the attic, because they have small windows, often located at an angle.

White, milk, cream and bleached beige tones are used to fill the room with light.. Coupled with the correct light sources, they create the appearance of a bright room. Since these rooms often emphasize the wood of a chopped house, it is preferable to avoid similar tones in the color of the canvas. For registration of children use a white background, adding to it different elements of decor in bright colors.

Sometimes for a covering of a ceiling choose a film of gentle-green color. Rooms of girls in the attic are decorated with light pink and lilac coatings, diluting the material with white contrast.

Black and brown tones are undesirable.: the first one darkens the room, the second one can be exclusively a stroke in the form of a pattern of a web, material of beams, arched ceilings, window frames. Wherein preferably, the color should be light or saturated, but not dark.

In the design of the stretch ceiling on the attic floor plays a big role correct lighting. Such designs look great with LED lights.

Not in every case a suspended type chandelier is appropriate on such a ceiling, therefore more often for the design of the roof used near-surface central lights, as well as additional spot lighting and ribbon lighting. The last two types are remarkable in that, with sufficient power of the light sources and the density of their placement, they can replace any chandelier.

LEDs have a lot of advantages. Such lighting is characterized by durability and minimum power consumption.. Almost all of the energy they convert to light, so do not heat up in the process. They do not flicker, are resistant to voltage drops, do not buzz, and in varieties like RGB they are able to change the shade of the light flux, due to which they are in demand among buyers.

In each case, the design is subject to a certain style chosen for the attic. However, due to the decor of the ceiling, you can visually change the perception of a complex room, giving it a clear organization depending on the available space, destination, age and taste preferences of the tenant.

For a better understanding, we turn to specific examples:

• The original and concise solution for arranging the space in the form of a contrasting frame of the window opening and beams. The use of spotlights, due to which a specific attic zone is highlighted, brings a feeling of home comfort to the space.
• The decoration of the spacious attic room with the stretch canvas “starry sky”. In addition to the spotlight, the composition uses a drawing of a starry sky, as well as ergonomic shaped spotlights. Created the effect of respectability.
• The original solution for the roof dome type. Blue stretch canvas with a glossy texture and installed through certainThe backlight gaps fit perfectly into the bedroom decor. The combination of blue and beige tones looks stylish.

• The use of white film with a glossy texture fills the space of the attic with light. The combination with spots looks unusual, while the light adjustment allows you to select the desired functional area.
• A stylish solution to decorating the attic with a stretch canvas with a glossy texture. Due to the small set of furniture and lively greenery, panoramic windows and doors, the room seems bright. The simple design at an angle fits well into the interior of the attic-living room.
• Unusual and stylish solution for the decoration of the accent section of the wall and ceiling. Illumination in glass shades complements the abstract pattern of the cloth, the combination with the main design of the attic creates a positive perception of space.

• Attic space for a cozy living room, dining area or a place to rest is possible when combining a tension structure with drywall. The use of spots and spotlights in different parts of the room fills the space with a special atmosphere, and the minimum of furniture details does not create chaos on the glossy surface of the coating.
• Laconic ceiling decoration with spotlights.The lilac companion is well matched to the white color, to soften the bright contrast, white furniture and a light gray tone of the floor covering are included in the interior.

There is an opinion that the stretch ceiling in the attic needs to be cleaned extremely rarely - this is due to the fact that the room is located above the main building. However, in fact, this view is erroneous. Synthetic material may have antistatic properties, but dust will sit on the surface in the same way as on the lower floor.

Consider the main points of care:

• The cloth must be wiped with a damp cloth or semi-dry sponge. Do not use wet rags, as after removing the stains will remain dirty stains.
• If the pollution is insignificant, you should use a vacuum cleaner, carefully removing dust from the surface of the material.
• Removing dirt from the surface of the textile material is more difficult. Do not use aggressive chemicals and soap solution: yellow spots may remain on the surface.
• Do not wait until the dirt becomes part of the picture. It is removed as it appears.

How the installation of a stretch ceiling in the attic, the following video.