How much does the stretch ceiling go down after installation?
In recent years, suspended ceilings are very popular. Such a finish is suitable for both high and low spaces, but remember that it is not advisable to install such ceilings if the ceiling height is below two meters.
It must be remembered that each canvas will eventually fall for natural reasons. For small rooms, a fabric variant is suitable, and for high rooms a PVC film.
Suitable room height
What should be the height of the premises to stretch the ceiling looked attractive? The recommended height is 210 cm. If they are below the specified norm, then the choice should be stopped on fabric canvases. Before installation, it is important to consider the following criteria:
- Supporting frameor rather its height. Most people use large profiles and fixings.Be aware that they eat about 20 cm from the height of the room.
- Presence of communications. First of all, it is necessary to carry out all the required communications. If there are a lot of them, then the height will necessarily fall to 15 centimeters.
- The size of devices for the organization of lighting. As a rule, spotlights are used for lighting in this case. Some people use classical chandeliers, which are not recommended to be installed in cases where the ceiling is less than 2.7 meters.
Remember that baguettes made of PVC are quite large in size, which is why they should not be used in low rooms.
It is better to opt for aluminum models, which are characterized by durability and strength.
How much the main ceiling falls
Do you know how much height is eaten up by a tension cover installation? This is due to the material from which the canvas is made. It can be made of polyvinyl chloride, drywall or fabric.
The height may decrease to varying degrees. Consider different situations:
- When using drywall, the height can be reduced by 20 cm. To reduce this figure, you can apply a primer on the base ceiling.In such a situation, the height will decrease only by 15 cm.
- When using PVC film, the ceiling will drop only by 3 centimeters, if the surface was initially flat.
- Rack ceilings will provide a reduction of 5 cm. This option takes up a minimum of space, because with the help of springs you can adjust the height.
- Fabric cloths reduce the height by 5-8 cm. They do not always need to install the frame, therefore, reducing the height of the room will not exceed 8 cm.
The smoothness of the walls also has an effect on reducing the room. It is recommended to give time to align the walls and the main ceiling.
We reduce inter ceiling space
You have the opportunity to reduce the distance between the ceiling covering and the stretch canvas. To do this, you need to take special materials and devices for the organization of lighting. In addition, it is worth choosing the most optimal way of fastening the stretch ceiling.
To reduce the interceiling space, use the following recommendations:
- Install LED strips or spotlights that are small in size. They must be mounted at a shallow depth, unlike the classical chandelier.You can use LED strip, which should be mounted around the perimeter of the ceiling.
- The best option for installation is the wedge method, which allows you to save about 7 centimeters of room height.
- Stop the choice on plasterboard sheets and canvases of a small thickness, since they do not need a massive crate.
- If you want to save a maximum of space, then use wall lighting. So you can win the extra three centimeters.
Causes sagging
Many owners of the stretch ceiling mark its sagging, which can occur for various reasons. They can be both natural and caused by various factors. Consider the most common ones:
- poor installation of the ceiling was carried out. Most often this happens if the tension cover was installed independently. The reason is the most common.
- Due to the poor installation of the fixture, the baguette moved away from the wall. In this case, the reason may also lie in the material of the wall. This is the most common situation in rooms in which the walls are made of drywall.
- When flooding neighbors above. In this case, there is a deep slack. Forms a huge bubble filled with water. PVC-linen perfectly copes with this situation; it can hold water and protect the room from flooding.
- The canvas sags under its own weight. It is considered optimal when the size of the sagging does not exceed 1 cm. Usually this is not even noticeable and can be detected using the construction level.
Technological parameters
Each room has its own technological parameters, which are important to consider for planning the type of stretch ceiling. It is worthwhile to consider in more detail how you can adapt the tensioning systems for rooms of different height:
High rooms
Tension rooms are mainly installed in high spaces, such as a living room, a hall or a hall. Here translucent cloths are mainly used, which allow to expand the room visually.
Experts note that the optimal inter-ceiling distance is 25-30 centimeters.
This distance allows you to equip the draft layer, where in the future will be installed lighting devices.Indoor ambient light is created by removing the tension cover from the base ceiling and using decorative lighting.
Often used a system called "starry sky." It looks most attractive in halls and halls. This is a ceiling canvas, complemented by LED or fiber-optic illumination. The star effect is created by the fluorescent coating. If a different coating is used using light generators, the ceiling will drop 20 centimeters.
When it comes to bulk or multi-level ceilings, here we can restrict ourselves to a minimum lowering of 10 centimeters. Such constructions are usually used in medium-height rooms that are not higher than 260 centimeters.
Multi-level designs will look great in large rooms. In this case, the designer is able to translate into reality any of his ideas, without limiting himself to anything.
Low rooms
Not all city apartments can boast a ceiling height of 260 centimeters. Many of them do not even reach the threshold of 230 centimeters.Having a low enough room, you hardly want to clutter it with a suspended ceiling. It is important to note that by choosing your fabric, you can “eat” at least from the height of the room.
Remember that with the help of a stretch ceiling, you can hide those that have irregularities and other defects on the underlying ceiling.
In some cases, this is the most optimal solution, since the alignment of the ceilings also lowers them by a few centimeters. With the help of a tension coating, you can hide the defects and eliminate irregularities of the ceiling.
Despite the fact that the room is low, many designers prefer the classic chandelier, which is mounted on a metal hook or mounting rail. Along the perimeter, you can install LED strip or spotlights, which will create a certain atmosphere in the room.
Remember that the height of the tension trim is an important point for the successful implementation of the ceiling design. If you take into account the parameters specified earlier, then you will be able to calculate in advance how much the height of the room will decrease after the installation of the tension cover. The allowable size must be determined in advance.
This is one of the most popular finishing methods for today, however many owners of low apartments avoid such decoration of the ceiling. This is due to the fact that they are not familiar with the existing tricks that will allow you to install a tension cover in a low room without greatly reducing its height.
For information on how to install stretch ceilings with drywall, see the following video.